HP Comware 5 Debug Manual Vol 3

Default
All types of QoS debugging are disabled.
Views
User view
Default command level
1: Monitor level
debugging qos car
Use debugging qos car to enable CAR debugging.
Use undo debugging qos car to disable CAR debugging.
Syntax
debugging qos car
undo debugging qos car
Default
CAR debugging is disabled.
Views
User view
Default command level
1: Monitor level
Usage guidelines
Table 5 describes output fields and messages for the debugging qos car command.
Table 160 Output from the debugging qos car command
Field
Description
Dropped a packet for CAR action
A packet was dropped by a CAR action configured on
the interface.
Examples
# Enable CAR debugging on Router A. Output similar to the following example is generated when the
rate of traffic from Router C to Router A exceeds 8 kbps under the following conditions:
•
The traffic from Router C travels by way of Router A to Router B.
•
A CAR policy is configured on the egress port of Router A to limit the outgoing traffic rate to 8 kbps.
<RouterA> debugging qos car
*Apr 26 05:19:13:589 2007 RouterA QOS/7/QOS_Debug:
QOS_CAR: Dropped a packet for CAR action
// A packet was dropped by CAR.
debugging qos cbq
Use debugging qos cbq to enable CBQ debugging.
266