HP Comware 5 Debug Manual Vol 3

*Dec 17 13:28:53:962 2007 Sysname QOS/7/QOS_Debug:
QOS_Event: Module 3200000 enable filling IP user tag outbound, and the current IPv4
reference counter is 1.
// Module 3200000 enabled filling IP user tags in the outbound direction. The current IPv4 reference
counter is 1 (IPv4 has referenced the function for one time).
*Dec 17 13:28:53:962 2007 Sysname QOS/7/QOS_Debug:
QOS_Event: Module 3200000 enable filling IP user tag outbound, and the current IPv6
reference counter is 1.
// Module 3200000 enabled filling IP user tags in the outbound direction. The current IPv6 reference
counter is 1 (IPv6 has referenced the function for one time).
debugging qos gts
Use debugging qos gts to enable GTS debugging.
Use undo debugging qos gts to disable GTS debugging.
Syntax
debugging qos gts
undo debugging qos gts
Default
GTS debugging is disabled.
Views
User view
Default command level
1: Monitor level
Examples
# Enable GTS debugging on Router A. Output similar to the following example is generated when the
rate of traffic from Router C to Router A exceeds 8 kbps under the following conditions:
•
The traffic from Router C travels by way of Router A to Router B.
•
A QoS policy that uses GTS is applied to the egress port of Router A to limit the outgoing traffic rate
to 8 kbps.
<RouterA> debugging qos gts
* Dec 17 14:10:32:480 2007 RouterA QOS/7/QOS_Debug:
QOS_GTS: Dropped a packet by GTS for exceeding queue limit.
// A packet was dropped by GTS because the queue limit was exceeded.
debugging qos match
Use debugging qos match to enable debugging for packet matching in QoS.
Use undo debugging qos match to disable debugging for packet matching in QoS.
Syntax
debugging qos match
undo debugging qos match
270