HP Comware 5 Debug Manual Vol 3

Table 165 Output from the debugging qos remark command
Field
Description
Failed to remark packet, for remark remark-type did
not match the packet type.
QoS failed to re-mark the packets because
remark-type did not match the packet type.
Examples
# Enable debugging for packet remarking in QoS on Router A. Output similar to the following example
is generated when an MPLS packet arrives at Router A under the following conditions:
•
The traffic from Router C (PE) travels by way of Router A (P device) to Router B (PE).
•
A QoS policy is applied to the egress port (GE port) of Router A to re-mark the IP precedence of
outgoing packets as 5.
<RouterA> debugging qos remark
*Dec 17 14:05:01:720 2007 RouterA QOS/7/QOS_Debug:
QOS_Remark: Failed to remark packet, for remark ip-precedence did not match the packet
type.
// QoS failed to set the IP precedence to 5 for the packets because the IP precedence type did not match
the packet type.
272