HP Comware 5 Debug Manual Vol 3

Voice RADIUS debugging commands
The output description tables in this document only contain fields and messages that require an
explanation.
debugging voice radius
Use debugging voice radius to enable voice RADIUS debugging.
Use undo debugging voice radius to disable voice RADIUS debugging.
Syntax
debugging voice radius { all | error | event | fsm | timer | trace }
undo debugging voice radius { all | error | event | fsm | timer | trace }
Default
Voice RADIUS debugging is disabled.
Views
User view
Default command level
2: System level
Parameters
all: Specifies all types of debugging for voice RADIUS.
error: Specifies error debugging.
event: Specifies event debugging.
fsm: Specifies finite state machine debugging.
timer: Specifies timer debugging.
trace: Specifies debugging for messages between the voice RADIUS module and the AAA module.
Usage guidelines
Table 1 describes output fields and messages for the debugging voice radius error command.
Table 166 Output from the debugging voice radius error command
• Field
• Description
•
Arg Error
•
The input parameter is incorrect.
•
Play Voice Error
•
Playing prompt tones failed.
•
Msg Not Support
In This State
•
A message that is not supported in the current state
was received.
•
Create Timer Fail
•
Creating a timer failed.
•
Start Authen Error
•
Originating an authentication request failed.
273