HP Comware 5 Debug Manual Vol 3

• Field
• Description
•
Disconnect Media
Error
•
Disconnecting the media failed.
Table 2 describes output fields and messages for the debugging voice radius event command.
Table 167 Output from the debugging voice radius event command
• Field
• Description
•
VORDS ---> CMC
•
Commands from the voice RADIUS module to
the CMC.
•
CMC [1] ---> VORDS [2]
•
Messages from CMC
1 to voice RADIUS
module 2.
•
VORDS ---
> CMC
UniConnect
•
The voice RADIUS module invoked a CMC
interface to establish a unidirectional
connection.
•
VORDS ---> CMC
Disconnect Media
•
The voice RADIUS module invoked a CMC
interface to disconnect the media.
•
VORDS ---> CMC Connect
Media
•
The voice RADIUS module invoked a CMC
interface to connect the media.
•
VORDS ---> CMC Create
New Call
•
The voice RADIUS module invoked a CMC
interface to establish a new call.
•
VORDS ---> CMC Start
Trigger
•
The voice RADIUS module invoked a CMC
interface to trigger a service.
•
VORDS ---
> CMC End
Trigger
•
The voice RADIUS module invoked a CMC
interface to stop triggering a service.
•
VORDS ---> CMC
Terminate Call
•
The voice RADIUS module invoked a CMC
interface to end a call.
•
VORDS ---
> CMC Get
History Info
•
The voice RADIUS module invoked a CMC
interface to obtain call history information.
•
VORDS ---
> IVR: Play
Voice
•
The voice RADIUS module invoked an IVR
interface to play prompts.
•
VORDS ---
> IVR Stop
Voice
•
The voice RADIUS module invoked an IVR
interface to stop playing voice prompts.
•
VORDS ---
> DRV Play
SigTone
•
The voice RADIUS invoked a drive interface to
play signal tones.
•
VORDS ---> DRV Stop
SigTone
•
The voice RADIUS module invoked a drive
interface to stop playing signal tones.
•
VORDS ---
> DRV Start
Dtmf Detect
•
The voice RADIUS module invoked a drive
interface to start DTMF detection.
•
VORDS ---> DRV Stop
Dtmf Detect
•
The voice RADIUS module invoked a drive
interface to stop DTMF detection.
•
Dial Flow Type: Did
•
The dialing process is a two-
stage dialing
process.
274