HP Comware 5 Debug Manual Vol 3

• Field
• Description
•
Dial Flow Type: Card
•
The dialing process is a card
number/password process (two-stage dialing
process).
•
Dial
Flow Type:
CallerNumber
•
The dialing process is a caller number process
(two-stage dialing process).
•
Dial Flow Type:
VoiceCaller
•
The dialing process is a caller number process
with IVR (two-stage dialing process).
Table 3 describes output fields and messages for the debugging voice radius fsm command.
Table 168 Output from the debugging voice radius fsm command
• Field
• Description
•
[1] RDS_STATE_INIT --->
RDS_STATE_SELECT_LANG
•
The state of voice RADIUS module 1
changed from RDS_STATE_INIT to
RDS_STATE_SELECT_LANG.
•
RDS_STATE_INIT
•
Initial state.
•
RDS_STATE_SELECT_LANG
•
A language was selected for prompt
tones.
•
RDS_STATE_CARD_RCV
•
Receiving digits of a card number.
•
RDS_STATE_PWD_RCV
•
Receiving digits of the password.
•
RDS_STATE_CALLED_RCV
•
Receiving digits of the called number.
•
RDS_STATE_TALKING
•
Conversation state.
•
RDS_STATE_RELEASE
•
Call release state.
Table 4 describes output fields and messages for the debugging voice radius timer command.
Table 169 Output from the debugging voice radius timer command
• Field
• Description
•
[1]
[RDS_STATE_SELECT_LANG]
Create Timer:
RDS_AUTHEN_TIMER ID:3
Length: 4ms:
•
A timer was created in the voice RADIUS
module.
•
[1]
[RDS_STATE_SELECT_LANG]
Delete Timer:
RDS_AUTHEN_TIMER ID:3
•
A timer was deleted
from the voice
RADIUS module.
•
RDS_INIT_AAA_TIMER
•
Timer that
specifies a wait for an
AAA_OK message in the initial state.
•
RDS_FIRSTNUM_TIMER
•
Timer that specifies a wait for the first
digit of a called number or card number.
•
RDS_INTERNUM_TIMER
•
Timer that specifies a wait for a digit
other than the first one of a called number
or card number.
275