HP Comware 5 Debug Manual Vol 3

RIP debugging commands
The output description tables in this document only contain fields and messages that require an
explanation.
debugging rip
Use debugging rip to enable RIP debugging.
Use undo debugging rip to disable RIP debugging.
Syntax
debugging rip process-id
undo debugging rip process-id
Default
RIP debugging is disabled.
Views
User view
Default command level
1: Monitor level
Parameters
process-id: Specifies a RIP process by its ID in the range of 1 to 65535.
Examples
# Enable RIP debugging for RIP process 1.
<Sysname> debugging rip 1
debugging rip brief
Use debugging rip brief to enable brief RIP debugging.
Use undo debugging rip brief to disable brief RIP debugging.
Syntax
debugging rip process-id brief
undo debugging rip process-id brief
Default
RIP brief debugging is disabled.
Views
User view
Default command level
1: Monitor level
288