HP Comware 5 Debug Manual Vol 3

debugging rip timer
Use debugging rip timer to enable RIP timer debugging.
Use undo debugging rip timer to disable RIP timer debugging.
Syntax
debugging rip process-id timer
undo debugging rip process-id timer
Default
RIP timer debugging is disabled.
Views
User view
Default command level
1: Monitor level
Parameters
process-id: Specifies a RIP process by its ID in the range of 1 to 65535.
interface interface-type interface-number: Specifies an interface by its type and number.
Examples
# Enable timer debugging for RIP process 1.
<Sysname> debugging rip 1 timer
*Oct 23 14:21:01:382 2006 Sysname RM/6/RMDEBUG: RIP 1 : Periodic timer expired
// The periodic update timer of RIP process 1 expired.
297