HP Comware 5 Debug Manual Vol 3

Field

Description

IS_IN/IS_EX/TO_IN/TO_EX/ALLOW/BLOCK

Record types of MLDv2 membership reports:

• IS_IN

• IS_EX

• TO_IN

• TO_EX

• ALLOW

• BLOCK

Group gadd Reported IPv6 group address.

(sadd, gadd) (S, G) entry.

v1/v2 Version of MLD membership report.

Interfacename(ifadd)

Interface that sent/received this message (interface

address).

Table 5 describes output fields and messages for the debugging mld query send command.

Table 14 Output from the debugging mld query send command

Field

Description

version <1-2> Version of the MLD query.

Interfacename(ifadd)

Interface that sent/received this message (interface

address).

Ignoring This MLD query message was ignored.

Send The MLD query message was sent.

With/without s-bit Whether S flag bit was set in the MLD query message.

Group gadd IPv6 group address to be queried.

Table 6 describes output fields and messages for the debugging mld ssm-mapping command.

Table 15 Output from the debugging mld ssm-mapping command

Field

Description

ssm-mapping notify

MLD reported SSM mapping multicast group

information to the upper-layer routing protocol.

ssm-mapping group SSM mapping multicast group.

Compatibility Group compatibility mode.

Lmqi timer Last-listener query timer.

ssm-mapping policy table SSM mapping rule table.

Table 7 describes output fields and messages for the debugging mld timer command.

Table 16 Output from the debugging mld timer command

Field

Description

Lmqi timeout for group The last-listener query timer timed out.