HP Comware 5 Debug Manual Vol 3

ttl:255 ri:0 fe:0 ft:1 sc:3 we:0 parity:0
DA:ffff-ffff-ffff SA:000f-e246-18af
ttlBase:255 ef:0 fi:0 ps:0 so:0 res:0
controlType:2 controlVersion:0
esw:1 ese:1 psw:5 pse:4 wc:0 jp:1 seqnum:29
// On interface RPR1, all contents of TP frames burst-sent to the west span were displayed.
NOTE:
For TP frames and TC frames, the sending function is mutually exclusive with the burst-sending function.
debugging rpr timer
Use debugging rpr timer to enable RPR timer debugging.
Use undo debugging rpr timer to disable RPR timer debugging.
Syntax
debugging rpr timer [ interface interface-type interface-number ]
undo debugging rpr timer [ interface interface-type interface-number ]
Default
RPR timer debugging is disabled.
Views
User view
Default command level
2: System level
Parameters
interface interface-type interface-number: Specifies a port by its type and number.
Usage guidelines
Table 5 describes output fields and messages for the debugging rpr timer command.
316