HP Comware 5 Debug Manual Vol 3

RRPP debugging commands
The output description tables in this document only contain fields and messages that require an
explanation.
debugging rrpp
Use debugging rrpp to enable RRPP debugging.
Use undo debugging rrpp to disable RRPP debugging.
Syntax
debugging rrpp [ domain domain-id [ ring ring-id ] ] { all | error | event | fast-detect-fsm |
fast-detect-packet | fsm | packet }
undo debugging rrpp [ domain domain-id [ ring ring-id ] ] { all | error | event | fast-detect-fsm |
fast-detect-packet | fsm | packet }
Default
RRPP debugging is disabled.
Views
User view
Default command level
1: Monitor level
Parameters
domain-id: Specifies an RRPP domain by its ID, in the range of 1 to 8.
ring-id: Specifies an RRPP ring by its ID, in the range of 1 to 64.
all: Specifies all types of debugging for RRPP.
error: Specifies debugging for RRPP errors.
event: Specifies debugging for RRPP events.
fast-detect-fsm: Specifies debugging for the RRPP fast detection state machine.
fast-detect-packet: Specifies debugging for RRPP fast detection packets.
fsm: Specifies debugging for RRPP state machines.
packets: Specifies debugging for RPPP packets.
Usage guidelines
RRPP debugging can take effect on three levels: global, domain-level, and ring-level.
•
If neither the domain-id argument nor the ring-id argument is specified, the operation takes effect
globally. In this case, the debugging rrpp command enables debugging on all the rings and in all
the domains.
•
If only the domain-id argument is specified, the operation applies to all the rings in the domain.
318