HP Comware 5 Debug Manual Vol 3

•
If both the domain-id argument and the ring-id argument are specified, the operation applies to the
specified ring in the specified domain.
Table 1 describes output fields and messages for the debugging rrpp error command.
Table 180 Output from the debugging rrpp error command
Field
Description
Failed to String
The memory operation failed.
String field value:
• allocate memory—Applying for dynamic memory failed.
• copy MBUF to PDU—Copying Ethernet network packets to the PDU
failed.
Domain domain-id Ring ring-id
Port interface-type
interface-number : String
Errors occurred when a port sent/received packets.
• domain-id—RRPP domain ID.
• ring-id—RRPP ring ID.
• interface-type interface-number—Interface type and interface number.
• The string field describes the errors:
 Master node received Health packet from primary port—The
primary port of the master node received Health packets from the
local node.

Send RRPP packet error—Sending RRPP packets failed.
Failed to write String queue
RRPP failed to write a queue.
String field value:
• packet—Writing a packet queue failed.
•
link status—Writing a link status queue failed.
Failed to write String event
RRPP failed to write an event.
String field value:
• packet—Writing a packet event failed.
• link status—Writing a link status event failed.
319