HP Comware 5 Debug Manual Vol 3

Table 3 describes output fields and messages for the debugging rrpp fast-detect-fsm command.
Table 182 Output from the debugging rrpp fast-detect-fsm command
Field
Description
Domain domain-id ring ring-id
String
State machine information of a specific RRPP ring in a specific RRPP
domain.
• domain-id—RRPP domain ID.
• ring-id—RRPP ring ID.
• String field value:
 RX FSM—Receive state machine.
 TX FSM—Transmit state machine.

RXTX FSM—Receive and transmit state machines.
Previous state is State Previous state of the state machine: Idle, Active, Complete, or Failed.
Current state is State Current state of the state machine: Idle, Active, Complete, or Failed.
Transition event is String
The String field indicates the state transition conditions:
• Receiving Fast-Detect packet from the primary port—The primary port
received fast-detection packets.
• Receiving Fast-Detect packet from the secondary port—The secondary
port received fast-detection packets.
• Fast-HelloTimer-Expired—The Fast-Hello Timer expired.
• Fast-FailTimer-Expired—The Fast-Fail Timer expired.
• Fail-Timer-Expired—The Fail timer expired.
• Detect-Enabled—Fast detection was enabled.
• Detect-Disabled—Fast detection was disabled.
Table 4 describes output fields and messages for the debugging rrpp fast-detect-packet command.
Table 183 Output from the debugging rrpp fast-detect-packet command
Field
Description
Domain domain-id ring ring-id
String1 fast-detect
packet.(Length: ULONG1, count:
ULONG2) String2
Information about fast-detection packets:
• domain-id—RRPP domain ID.
• ring-id—RRPP ring ID.
• String1—Rcvd for receiving packets and Send for sending packets.
• ULONG1—Packet length.
• ULONG2—Number of packets.
• String2—All contents of the packet in hexadecimal format.
Table 5 describes output fields and messages for the debugging rrpp fsm command.
321