HP Comware 5 Debug Manual Vol 3

Table 184 Output from the debugging rrpp fsm command
Field
Description
Domain domain-id ring ring-id
String
Information about a specific state machine of a specific ring in a specific
domain:
• domain-id—RRPP domain ID.
• ring-id—RRPP ring ID.
• The String1 field represents the state machine type:
 Master Node FSM—Master node state machine.
 Transit Node FSM—Transit node state machine.
 Edge Node FSM—Edge node state machine.

Assistant-Edge Node FSM—Assistant edge node state machine.
Previous state is State
Previous state of the state machine: Complete, Failed, Init, Link-up,
Link-Down, Preforwarding, Link-Up-Notify, Link-Down-Notify,
Preforward-Notify, or Idle.
Current state is State
Current state of the state machine: Complete, Failed, Init, Link-up,
Link-Down, Preforwarding, Link-Up-Notify, Link-Down-Notify,
Preforward-Notify, or Idle.
Transition event is String
A transition event occurred. The String2 field gives the cause of the state
transition:
• Ring-Enabled—The ring is enabled.
• Ring-Disabled—The ring is disabled.
• the ports status under Init state—The port is in the initial state.
• Hello-Timer-Expired—The Hello timer expires.
• Fail-Timer-Expired—The Fail timer expires.
• Edgehello-Timer-Expired—The Edgehello timer expires.
• Edgefail-Timer-Expired—The Edgefail timer expires.
• Receiving own Health packet.
• Receiving Link-Down packet.
• Receiving Common-Flush-FDB packet.
• Receiving Complete-Flush-FDB packet.
• Receiving Sub-Ring-FDB packet.
• Receiving Edge-Hello packet.
• Receiving Major-Fault packet.
• own link down.
• own link restoring.
Table 6 describes output fields and messages for the debugging rrpp packet command.
322