HP Comware 5 Debug Manual Vol 3

Table 186 Output from the debugging session aging-process command
Field
Description
State: PRO_STATE
Protocol states:
• TCP_SYN_OPEN.
• TCP_ESTABLISHED.
• TCP_FIN_CLOSE.
• TCP_CLOSED.
• UDP_OPEN.
• UDP _READY.
• ICMP_REQUEST.
• ICMP_REPLY.
• RAWIP_OPEN.
• RAW IP_ READY.
• ICMP_ERROR_CTRL.
• PR O _ FTP.
• PRO_DNS.
• PRO_MSN.
• PRO_QQ.
Extent-State
Session extension state:
• WAITACK0.
• WAITACK1.
• WAITACK2.
• INACTIVE.
• ACCELERATE.
• HALF_SESSION.
• KEEP_ALIVE.
• PERSIST.
• DYNAMIC.
Examples
# Enable debugging for session aging queue processing on the device enabled with the security module.
When the device pings 192.168.1.58, output similar to the following example is generated:
<Sysname> debugging session aging-process
<Sysname> ping 192.168.1.58
*May 27 10:30:28:846 2009 Sysname SESSION/7/AGINGPROC:
Tuple5: 3.3.3.2/2048-->3.3.3.1/3(ICMP)
State: ICMP_REQUEST Extent-State: NULL
// Session management detected that the protocol state of the ICMP session is ICMP_REQUEST, with no
extension state.
debugging session engine
Use debugging session engine to enable debugging for session engine.
Use undo debugging session engine to disable debugging for session engine.
329