HP Comware 5 Debug Manual Vol 3

Field
Description
Received message from DRIVER: msg
Msg: Message name.
• CREAT_SESSION.
• UPDATE_SESSION.
• DELETE_SESSION.
Succeeded in process according to DRIVER
message
process: Processing action.
• creating a session.
• updating a session.
• deleting a session.
Pro Session protocol.
ID Session ID.
VPN Index VPN index in the HASH entry.
Init IP/Port --> resp IP/Port VpnIndex
HASH entry:
Initiator IP/port -> Responder IP/port VPN index.
Init IP/Port <-- resp IP/Port VpnIndex
Inverse HASH entry.
Initiator IP/port <- Responder IP/port VPN index.
Table 3 describes output fields and messages for the debugging session engine error command.
Table 188 Output from the debugging session engine error command
Field
Description
DRIVER failed to process the event: event
The driver failed to process the message sent by the session
engine, and the driver notified the session engine of the event.
event: Message name.
• A session was created.
• A session was deleted.
• A session was updated.
• A relation-table was created.
• A relation-table was deleted.
Failed to process according to DRIVER
message
process: Processing action.
• creating a session.
• updating a session.
• deleting a session.
Examples
# Enable debugging for session engine on a firewall device. When the device sends out a UDP packet,
output similar to the following example is generated:
<Sysname> debugging session engine event
<Sysname> terminal debugging
*Apr 26 14:41:36:516 2007 Sysname SESS_DP/7/ENGINE:
EVENT:Received SESSION_END_NOTIFY message from SESSION.
Pro:UDP ID:57
Initiator: IP/ Port Responder: IP/ Port VPN Index
1.1.1.2/ 100 --> 2.2.2.2/ 100 0
331