HP Comware 5 Debug Manual Vol 3

1.1.1.2/ 100 <-- 2.2.2.2/ 100 0
// The session engine received a SESSION_END_NOTIFY message sent by the session management
module.
*Apr 26 14:41:36:517 2007 Sysname SESS_DP/7/ENGINE:
EVENT: Succeeded in notifying DRIVER to process the event: A session was created.
Pro:UDP ID:57
Initiator: IP/ Port Responder: IP/ Port VPN Index
1.1.1.2/ 100 --> 2.2.2.2/ 100 0
1.1.1.2/ 100 <-- 2.2.2.2/ 100 0
// The session engine received a message from the driver. The driver created a session successfully.
# Enable debugging for session engine on a firewall device. When the device sends out a TCP packet,
output similar to the following example is generated:
<Sysname> debugging session engine error
<Sysname> terminal debugging
*Apr 26 14:41:36:516 2007 Sysname SESS_DP/7/ENGINE:
EVENT:Received SESSION_END_NOTIFY message from SESSION.
Pro:TCP ID:60
Initiator: IP/ Port Responder: IP/ Port VPN Index
1.1.1.2/ 100 --> 2.2.2.2/ 100 0
1.1.1.2/ 100 <-- 2.2.2.2/ 100 0
// The session engine received a SESSION_END_NOTIFY message sent by the session management
module.
*Apr 26 14:41:36:517 2007 Sysname SESS_DP/7/ENGINE:
EVENT: DRIVER failed to process the event: A session was created.
Pro:TCP ID:60
Initiator: IP/ Port Responder: IP/ Port VPN Index
1.1.1.2/ 100 --> 2.2.2.2/ 100 0
1.1.1.2/ 100 <-- 2.2.2.2/ 100 0
// The session engine received a message from the driver. The driver failed to create a session.
debugging session ext-info
Use debugging session ext-info to enable debugging for extended information of session management.
Use undo debugging session ext-info to disable debugging for extended information of session
management.
Syntax
debugging session ext-info { all | event | error } [ acl acl-number ]
undo debugging session ext-info { all | event | error }
Default
Debugging for extended information of session management is disabled.
Views
User view
332