HP Comware 5 Debug Manual Vol 3

Default command level
1: Monitor level
Parameters
all: Specifies all types of debugging for extended information.
event: Specifies debugging for events of extended information.
error: Specifies debugging for errors of extended information.
acl acl-number: Uses an ACL to match sessions for logging. The acl-number argument specifies an ACL
number in the range of 2000 to 3999. If you execute the command multiple times with different ACLs, the
most recent command takes effect.
Usage guidelines
Table 4 describes output fields and messages for the debugging session ext-info event command.
Table 189 Output from the debugging session ext-info event command
Field
Description
Attach, Detach, GetAttach
Extended information operation type: Attach, Detach, or
GetAttach.
succeed Extension information operation is done successfully.
Module module
Service modules:
• NAT.
• ASPF.
• ALG.
• STAT (attack prevention)
• TCPPROXY.
• ENGINE (session engine)
• P2P.
• LB.
• FLOW_REDIRECT.
• FLT6.
• NATPT.
• CONNLMT.
• PBR (policy routing)
• DDOS.
• SRVASST (Server Assistant)
• SESSIONLOG.
Examples
# Enable debugging for extended information on the device with the security module enabled. The
output in this example was created when the following conditions exist:
•
The NAT server function is configured.
•
An ICMP packet that can be translated by the NAT server is sent.
<Sysname> debugging session ext-info all
*Mar 24 18:15:47:164 2007 Sysname DPSESSIO/7/EXTINFO:
Attach succeed
Module NAT
333