HP Comware 5 Debug Manual Vol 3

*Mar 26 09:17:54:112 2007 Sysname DPSESSIO/7/RELATION:
LocalTuple3: 192.168.1.8/4780 : GlobalTuple3: 192.168.1.8/4780 (TCP)
Delete time out
// Session management deleted the relation entry due to timeout.
*Mar 24 18:22:13:476 2007 Sysname DPSESSIO/7/RELATION:
Error: Memory not enough for relation
// Session management failed to create a relation entry due to insufficient resources.
debugging session session-table
Use debugging session session-table to enable debugging for session table entries of session
management.
Use undo debugging session session-table to disable debugging for session table entries of session
management.
Syntax
debugging session session-table { all | event | error | fsm } [ acl acl-number ]
undo debugging session session-table { all | event | error | fsm }
Default
Debugging for session table entries is disabled.
Views
User view
Default command level
2: System level
Parameters
all: Specifies all types of debugging for session table.
event: Specifies debugging for session table events.
error: Specifies debugging for session table errors.
fsm: Specifies debugging for session table state machine.
acl acl-number: Uses an ACL to match sessions for logging. The acl-number argument specifies an ACL
number in the range of 2000 to 3999. If you execute the command multiple times with different ACLs, the
most recent command takes effect.
Usage guidelines
Table 7 describes output fields and messages for the debugging session session-table fsm command.
Table 192 Output from the debugging session session-table fsm command
Field
Description
Tuple5(FSM): Session 5-tuple.
FSM:preState-->nextState,
State machine changes from one state to another
state.
received: ProtoType Transport layer protocol type of the received packet.
336