HP Comware 5 Debug Manual Vol 3

debugging session log active-flow
Use debugging session log active-flow to enable debugging for active flow.
Use undo debugging session log active-flow to disable debugging for active flow.
Syntax
debugging session log active-flow { all | event | error }
undo debugging session log active-flow { all | event | error }
Default
Debugging for active flow is disabled.
Views
User view
Default command level
1: Monitor level
Parameters
all: Specifies all types of debugging for active flow.
event: Specifies debugging for active flow operation events.
error: Specifies debugging for active flow operation errors.
Examples
# Enable debugging for active flow logging events on the device that supports session management.
<Sysname> debugging session log active-flow event
# Configure session logging output thresholds.
<Sysname> system-view
[Sysname] session log time-active 10
# Enable the session logging function.
[Sysname] interface gigabitethernet 1/1
[Sysname-GigabitEthernet1/1] session log enable inbound
When a data flow passes through the device, output similar to the following example is generated:
*Mar 26 08:50:24:568 2007 Sysname DPSESS/7/active-flow:
Event: Active-flow queue created.
// Session management created an active-flow queue.
# Disable the session logging function.
[Sysname-GigabitEthernet0/1] undo session log enable
*Mar 26 08:50:24:568 2007 Sysname DPSESS/7/active-flow:
Event: Active-flow queue deleted.
// Session management deleted the active-flow queue.
# Ping the device from the host at 192.168.0.2. If the ping operation succeeds, output similar to the
following messages is generated:
*Mar 26 08:50:24:568 2007 Sysname DPSESS/7/active-flow:
Tuple5: 192.168.0.2/8-->192.168.1.58/3840(ICMP)
Event: Session appended to the active-flow queue.
339