HP Comware 5 Debug Manual Vol 3

// Session management added the created ICMP session to the active-flow queue.
# Delete the created ICMP session. When the created ICMP session is deleted successfully, output similar
to the following messages is generated:
<Sysname> reset session source-ip 192.168.0.2
*Mar 26 08:50:24:568 2007 Sysname DPSESS/7/active-flow:
Tuple5: 192.168.0.2/8-->192.168.1.58/3840(ICMP)
Event: Session removed from the active-flow queue.
// Session management deleted the ICMP session from the active-flow queue.
# Enable debugging for active flow logging errors on a device that supports session management. The
output in this example was created when the following conditions exist:
•
The session logging function is enabled.
•
Thresholds for outputting session logs are configured.
<Sysname> debugging session log active-flow error
*Dec 16 15:55:35:377 2007 Sysname SESSION/7/LOG_ACTFLOW:Slot=2;
Error: Failed to create the active-flow queue.
340