HP Comware 5 Debug Manual Vol 3

SIP debugging commands
The output description tables in this document only contain fields and messages that require an
explanation.
debugging voice sip
Use debugging voice sip to enable SIP debugging.
Use undo debugging voice sip to disable SIP debugging.
Syntax
debugging voice sip { all | error | event | message | stack | timer }
undo debugging voice sip { all | error | event | message | stack | timer }
Default
SIP debugging is disabled.
Views
User view
Default command level
2: System level
Parameters
all: Specifies all types of SIP debugging.
error: Specifies error debugging.
event: Specifies event debugging.
message: Specifies message debugging.
stack: Specifies protocol stack debugging.
timer: Specifies timer debugging.
Usage guidelines
Table 1 describes output fields and messages for the debugging voice sip error command.
Table 193 Output from the debugging voice sip error command
Field
Description
Filling ACCP head failed SIP failed to fill ACCP header.
Failed to Malloc Memory for XXX SIP failed to allocate memory to XXX.
Get Local Address From Uri Failed SIP failed to obtain the local address from URI.
The UserInfo Number is not exist The UserInfo Number did not exist.
Send accp service ack msg failed SIP failed to send an ACCP service Ack.
Stack --> Adapter : Refer Response
Adapter module received a REFER response from the
protocol stack.
341