HP Comware 5 Debug Manual Vol 3

Enable SSM CALL ALL debugging functions
<Sysname>
*Sep 7 16:38:37:637 2007 Sysname SSM/7/VOICE:
SSM_INFO [CALL_SSA]:
General: Succeed in getting a free element from the list.
Additional: Call control block ID is 42.
// The SSA module got a free element from the list as the control block (ID: 42) for the current call.
*Sep 7 16:38:37:638 2007 Sysname SSM/7/VOICE:
SSM_INFO [CALL_SSA]:
General: Received message from the stack.
Additional: The message type is SetupInd.
Call control block ID is 42.
Caller number is 2002.
Called number is 200.
// The SSA module received a SetupInd message from the network side.
*Sep 7 16:38:37:638 2007 Sysname SSM/7/VOICE:
SSM_PRIM [CALL_SSA]:
Send UCM Setup request message.
// The SSA module sent a UCM_SETUPREQ message to the SLC module.
*Sep 7 16:38:37:638 2007 Sysname SSM/7/VOICE:
SSM_PRIM [CALL_SLC]:
Receive UCM Setup request message.
// The SLC module received the UCM_SETUPREQ message.
*Sep 7 16:38:37:638 2007 Sysname SSM/7/VOICE:
SSM_INFO [CALL_SLC]:
General: Succeed in getting a free element from the list.
Additional: Conference control block ID is 15.
// The SLC module got a free element from the list as the conference control block (ID: 15).
*Sep 7 16:38:37:638 2007 Sysname SSM/7/VOICE:
SSM_EVENT [CALL_SLC]:
CALLCTRL: Received event CALLESTABLISH while at state INIT.(ObjectID = 15)
// The state machine CALLCTRL received a CALLESTABLISH event in the INIT state.
*Sep 7 16:38:37:638 2007 Sysname SSM/7/VOICE:
SSM_INFO [CALL_SLC]:
General: The authentication is needed.
// Authentication is needed for this call.
*Sep 7 16:38:37:638 2007 Sysname SSM/7/VOICE:
SSM_PRIM [CALL_SLC]:
Send UCM Setup reject message.
// The SLC module sent a UCM_SETUPREJ message to the SSA module.
*Sep 7 16:38:37:639 2007 Sysname SSM/7/VOICE:
SSM_TIMER [CALL_SLC]:
Start Timer: Type = 4, Group = 4, Index = 15, Length = 8000
// The SLC module started a timer, with the value set to 8000 ms.
*Sep 7 16:38:37:840 2007 Sysname SSM/7/VOICE:
354