HP Comware 5 Debug Manual Vol 3

SSM_TIMER [CALL_SLC]:
Start Timer: Type = 6, Group = 6, Index = 23, Length = 16000
// The SLC module started a timer, with the value set to 16000 ms.
*Sep 7 16:38:40:934 2007 Sysname SSM/7/VOICE:
SSM_FSM [CALL_SLC]:
CALLCLT: State changed from IDLE to SETUP.(ObjectID = 23)
// The state machine CALLCLT transitioned from IDLE to SETUP.
*Sep 7 16:38:41:135 2007 Sysname SSM/7/VOICE:
SSM_FSM [CALL_SLC]:
CALLCTRL: State changed from CALLINPROGRESS to INCALL.(ObjectID = 15)
// The state machine CALLCTRL transitioned from CALLINPROGRESS to INCALL.
*Sep 7 16:38:41:246 2007 Sysname SSM/7/VOICE:
SSM_INFO [CALL_SLC]:
General: Succeed in dealing with call request.
Additional: Conference ID is 15.
Incoming call ID is 22.
Outgoing call ID is 23.
Caller number is 2002.
Called number is 200.
// The SLC module succeeded in handling the call request.
*Sep 7 16:38:41:397 2007 Sysname SSM/7/VOICE:
SSM_PRIM [CALL_SSA]:
Receive UCM Setup ACK message.
// The SSA module received the UCM_SETUPACK message.
*Sep 7 16:38:41:498 2007 Sysname SSM/7/VOICE:
SSM_PRIM [CALL_SSA]:
Receive UCM Setup request message.
// The SSA module received the UCM_SETUPREQ message.
*Sep 7 16:38:41:699 2007 Sysname SSM/7/VOICE:
SSM_INFO [CALL_SSA]:
General: Succeed in getting a free element from the list.
Additional: Call control block ID is 44.
// The SSA module got a free element from the list as the control block (ID: 44) for the current call.
*Sep 7 16:38:41:851 2007 Sysname SSM/7/VOICE:
SSM_INFO [CALL_SSA]:
General: Received message from the stack.
Additional: The message type is SetupAck.
// The SSA module received a SetupAck message from the network side.
357