HP Comware 5 Debug Manual Vol 3

SSM_TIMER [REG_SLC]:

Start Timer: Type = 3, Group = 3, Index = 33, Length = 3600000

*Sep 7 16:51:42:37 2007 Sysname SSM/7/VOICE:

SSM_FSM [REG_SLC]:

*Sep 7 16:51:42:297 2007 Sysname SSM/7/VOICE:

SSM_PRIM [REG_SSA]:

Receive UCM Register response message.

*Sep 7 16:51:42:397 2007 Sysname SSM/7/VOICE:

SSM_INFO [REG_SSA]:

General: Succeed in sending the network message.

Additional: Method type is REGISTER, status code is 200.

debugging voice ssm stack

Use debugging voice ssm stack to enable debugging for SIP server protocol stack.

Use undo debugging voice ssm stack to disable debugging for SIP server protocol stack.

Syntax

debugging voice ssm stack { all | info | packet | timer }

undo debugging voice ssm stack { all | info | packet | timer }

Default

Debugging for SIP server protocol stack is disabled.

Views

User view

Default command level

2: System level

Parameters

stack: Enables debugging for SIP server protocol stack.

all: Specifies all types of debugging.

info: Specifies information debugging.

packet: Specifies packet debugging.

timer: Specifies timer debugging.

Examples

The output in the following examples was created when User A with number 2001 calls User B with

number 3001. User A and User B have both registered with the SIP server.

# Enable timer debugging for SIP server protocol stack.

<Sysname>debugging voice ssm stack timer

Enable SSM STACK TIMER debugging functions

370