HP Comware 5 Debug Manual Vol 3

Views
User view
Default command level
1: Monitor level
Parameters
abnormal: Specifies MLD snooping exception debugging.
all: Specifies all types of MLD snooping debugging.
driver: Specifies MLD snooping interface driver debugging.
event: Specifies MLD snooping event debugging.
group: Specifies MLD snooping multicast group debugging.
ipc { receive | send }: Specifies inbound/outbound IPC packet debugging.
packet: Specifies MLD snooping packet debugging.
vlan vlan-id: Specifies the VLAN to which an Ethernet port belongs. The value range for the vlan-id
argument is 1 to 4094.
port interface-type interface-number: Specifies an Ethernet port.
timer: Specifies debugging for MLD snooping timers.
Usage guidelines
Table 2 describes output fields and messages for the debugging mld-snooping driver command.
Table 21 Output from the debugging mld-snooping driver command
Field
Description
Add/Delete multicast vlan OIF to/from driver
A multicast VLAN outgoing interface was added to or
deleted from the driver.
Add/Delete Level2 IP entry to/from driver
A Layer 2 IP entry was added to or deleted from the
driver.
Add/Delete Unit/Board for multicast vlan to/from
driver
A unit or board for the multicast VLAN was added to
or deleted from the driver.
Add/Delete Unit/Board for Level2 IP entry to/from
driver
A unit or board for the Layer 2 IP entry was added to
or removed from the driver.
Add/Delete Port for multicast vlan OIF to/from driver
A port was added to or deleted from the multicast
VLAN outgoing interface list on the driver.
Add/Delete Port for Level2 IP entry to/from driver
A port was added to or deleted from the Layer 2 IP
entry on the driver.
Add/Delete multicast vlan IP entry to/from driver
A multicast VLAN IP entry was added to or deleted
from the driver.
Add/Delete Level2 MAC entry to/from driver
A Layer 2 MAC entry was added to or deleted from
the driver.
mask boardmask
The destination board mask of an entry was added to
or deleted from the driver.
(saddr, gaddr) (S, G) entry.
32