HP Comware 5 Debug Manual Vol 3

<Sysname> terminal monitor
% Current terminal monitor is on
<Sysname> debugging snmp agent packet header
*Jul 27 08:51:00:563 2007 Sysname SNMP/7/HEADER:
incoming SNMPv3 packet
security model: v3
security level: authNoPriv
user name: v3user1
snmpEngineID: 000063A27F00000100001707
snmpEngineBoots: 1
snmpEngineTime: 54591
// SNMP received an SNMPv3 request.
# Enable information center debugging and received SNMP packet debugging on the device. Output
similar to the following example is generated when network management software is used to perform a
Get operation on object sysUpTime.0 under these conditions:
•
SNMPv2c is enabled.
•
A community name is configured.
<Sysname> terminal debugging
% Current terminal debugging is on
<Sysname> terminal monitor
% Current terminal monitor is on
<Sysname> debugging snmp agent packet receive
*Jul 27 08:58:52:594 2007 Sysname SNMP/7/PACKET_SRC:
packet received from 10.165.81.75 via UDP
*Jul 27 08:58:52:594 2007 Sysname SNMP/7/PACKET:
get request
request-id: 13
error-status: 0
error-index: 0
*Jul 27 08:58:52:594 2007 Sysname SNMP/7/VBLIST:
sysUpTime.0:
// SNMP received an SNMP request from 10.165.81.75 through UDP.
# Enable information center debugging and sent SNMP packet debugging on the device. Output similar
to the following example is generated when network management software is used to perform a Get
operation on object sysUpTime.0 under these conditions:
•
SNMPv2c is enabled.
•
A community name is configured.
<Sysname> terminal debugging
% Current terminal debugging is on
<Sysname> terminal monitor
% Current terminal monitor is on
<Sysname> debugging snmp agent packet send
*Jul 27 09:08:21:563 2007 Sysname SNMP/7/PACKET:
response
request-id: 16
error-status: 0
394