HP Comware 5 Debug Manual Vol 3

•
SNMPv2c is enabled.
•
A community name is configured.
<Sysname> terminal debugging
% Current terminal debugging is on
<Sysname> terminal monitor
% Current terminal monitor is on
<Sysname> debugging snmp agent process stack info
<Sysname>
*Jul 27 09:42:13:578 2007 Sysname SNMP/7/STACK_INFO:
read request
*Jul 27 09:42:13:578 2007 Sysname SNMP/7/STACK_INFO:
PDU type is 160 and PDU version is 1.
*Jul 27 09:42:13:578 2007 Sysname SNMP/7/STACK_INFO:
make request
*Jul 27 09:42:13:578 2007 Sysname SNMP/7/STACK_INFO:
process request
*Jul 27 09:42:13:578 2007 Sysname SNMP/7/STACK_INFO:
get instance sysUpTime.0
*Jul 27 09:42:13:578 2007 Sysname SNMP/7/STACK_INFO:
create CFG message for get-request and parse CFG message for response
*Jul 27 09:42:13:578 2007 Sysname SNMP/7/STACK_INFO:
create CFG message
*Jul 27 09:42:13:578 2007 Sysname SNMP/7/STACK_INFO:
create CFG message for leaf node
*Jul 27 09:42:13:578 2007 Sysname SNMP/7/STACK_INFO:
get instance sysUpTime.0 in batch way
*Jul 27 09:42:13:578 2007 Sysname SNMP/7/STACK_INFO:
parse CFG message and fill variable-bindings
*Jul 27 09:42:13:594 2007 Sysname SNMP/7/STACK_INFO:
get value from CFG message (CMO type: 3)
*Jul 27 09:42:13:594 2007 Sysname SNMP/7/STACK_INFO:
convert data type 43 from CFG message
*Jul 27 09:42:13:594 2007 Sysname SNMP/7/STACK_INFO:
fill variable-bindings
*Jul 27 09:42:13:594 2007 Sysname SNMP/7/STACK_INFO:
send response to NMS (errStatus: 0, errIndex: 0)
// Info-level debugging information was generated during the process of handling the SNMP request
PDU and generating the response.
debugging snmp trap packet
Use debugging snmp trap packet to enable debugging for SNMP trap messages.
Use undo debugging snmp trap packet to disable debugging for SNMP trap messages.
Syntax
debugging snmp trap packet
undo debugging snmp trap packet
397