HP Comware 5 Debug Manual Vol 3

interface interface-type interface-number: Specifies a port by its type and number. If you do not specify
a port, this command enables STP FSM debugging for all ports.
Usage guidelines
Table 2 describes output fields and messages for the debugging stp fsm command.
Table 206 Output from the debugging stp fsm command
Field
Description
Instance InstanceID's port
PortID(PortName) enters String
state
VLAN VLANID's port
PortID(PortName) enters String
state
The state of port PortID(PortName) on MSTI InstanceID or VLAN VLANID is
String. The possible values of the String argument are:
• PIM%ENABLED
• PIM%AGED
• PIM%CURRENT
• PIM%RECEIVED
• PIM%SUPERIOR_DESIGNATED
• PIM%REPEATED_DESIGNATED
• PIM%ROOT
• PIM%OTHER
• PPM%SEND_RSTP
• PPM%SENDING_RSTP
• PPM%SEND_STP
• PPM%SENDING_STP
• PRT%BLOCK_PORT
• PRT%BLOCKED_PORT
• PRT%BACKUP_PORT
• PRT%ACTIVE_PORT
• PRT%PROPOSED
• PRT%PROPOSING
• PRT%AGREES
• PRT%SYNCED
• PRT%LEARN
• PRT%FORWARD
• PRT%REROOT
• PRT%LISTEN
• PRT%REROOTED
• PRT%ROOT
• TCM%INIT
• TCM%INACTIVE
• TCM%DETECTED
• TCM%ACTIVE
• TCM%NOTIFIED_TCN
• TCM%NOTIFIED_TC
• TCM%PROPAGATING
• TCM%ACKNOLEDGED.
The percent sign (%) is preceded by the state machine name and followed
by the state machine state.
404