HP Comware 5 Debug Manual Vol 3

Table 7 describes output fields and messages for the debugging mld-snooping timer command.
Table 26 Output from the debugging mld-snooping timer command
Field
Description
Create/Set MLD snooping created or set a timer.
host port aging timer/time
router port aging timer/time
aggregation host port aging timer/time
aggregation router port aging timer/time
querier timer/interval
query respond timer
MLD snooping timers:
• Host port aging timer/time
• Router port aging timer/time
• Aggregation host port aging timer/time
• Aggregation router port aging timer/time
• Querier timer/interval
• Query respond timer
Examples
# Enable MLD snooping interface driver debugging. When MLD snooping is enabled on the device,
output similar to the following example is generated:
<Sysname> debugging mld-snooping driver
*Nov 7 09:32:30:738 2006 Sysname MCS/7/driver:Add Level2 IP entry to driver: vlan:2,
S,G(2002::2,FF08::8), port num:1. (G08758)
// An IP entry (2002::2, FF08::8) was added to the driver in VLAN 2.
# Enable MLD snooping event debugging. When MLD snooping is on the device and MLD snooping
proxy is enabled in VLAN 2, output similar to the following example is generated:
<Sysname> debugging mld-snooping event
*Nov 7 17:22:24:532 2006 Sysname MCS/7/event:Succeed to enable MLD snooping globally.
(G083769)
// MLD snooping was enabled globally.
*Nov 7 17:23:21:742 2006 Sysname MCS/7/event:Succeed to enable MLD snooping proxying on
vlan 2. (G202463)
// MLD snooping proxy was enabled in VLAN 2.
# Enable MLD snooping multicast group debugging. When MLD snooping is enabled on the device,
output similar to the following example is generated:
<Sysname> debugging mld-snooping group
*Nov 7 09:34:59:488 2006 Sysname MCS/7/groups:Deleted IP and MAC entry of
(S,G)(2002::2,FF08::8) on vlan 2. (G142433)
// The IP and MAC entry was deleted.
# Enable inbound IPC packet debugging. When MLD snooping is enabled on the device, output similar
to the following example is generated:
<Sysname> debugging mld-snooping ipc receive
*Nov 7 18:07:02:726 2006 Sysname MCS/7/ipcrecv:Slot=1;Received an IPC packet and insert
it into queue. (G18955)
// MLD snooping received an IPC packet and inserted it into the IPC queue.
# Enable outbound IPC packet debugging. When MLD snooping is enabled on the device, output similar
to the following example is generated:
<Sysname> debugging mld-snooping ipc send
34