HP Comware 5 Debug Manual Vol 3

SSL VPN debugging commands
debugging ssl-vpn
Use debugging ssl-vpn to enable SSL VPN debugging.
Use undo debugging ssl-vpn to disable SSL VPN debugging.
Syntax
debugging ssl-vpn { all | ipac | tlac | wac } { all | error | event | packet }
undo debugging ssl-vpn { all | ipac | tlac | wac } { all | error | event | packet }
Default
SSL VPN debugging is disabled.
Views
User view
Default command level
1: Monitor level
Parameters
all: Specifies debugging for IP network accesses, TCP application accesses, and website accesses.
ipac: Specifies debugging for IP network accesses.
tlac: Specifies debugging for TCP application accesses.
wac: Specifies debugging for website accesses.
all: Specifies debugging for SSL VPN errors, events, and packets.
error: Specifies debugging for SSL VPN errors.
event: Specifies debugging for SSL VPN events.
packet: Specifies debugging for SSL VPN packets.
Examples
# Enable all types of debugging for website accesses. When a user accesses WAC resources through
the SSL VPN Web interface, output similar to the following example is generated:
<Sysname> terminal debugging
<Sysname> terminal monitor
<Sysname> debugging ssl-vpn wac all
*Jun 5 10:15:09:78 2008 Sysname SVPN/7/WAC_EVENT: Resource 0x214800 is authorized to user
0x44b70401.
// Resource 0x214800 was authorized to user 0x44b70401.
*Jun 5 10:15:09:78 2008 Sysname SVPN/7/WAC_EVENT: Succeeded in adding web site
http://192.168.1.100/test/ to connection pool.
// Website http://192.168.1.100/test/ was added to the connection pool.
*Jun 5 10:15:09:78 2008 Sysname SVPN/7/WAC_EVENT: Succeeded in creating new connection,
host IP address: 192.168.1.100, port: 20480.
431