HP Comware 5 Debug Manual Vol 3

Field
Description
L4 LB session backed up. VPN ID: VPN-ID, Virtual
Service (IP: IP-address, Port: Port), SNat (IP:
IP-address, Port: Port), Real Service (IP: IP-address,
Port: Port, Name: rservicename), Client (IP:
IP-address, Port: Port)
LB backup information. L4 LB session backup
succeeded.
• VPN-ID—VPN ID.
• Virtual Service—Virtual service information:
 IP-address—IP address of the virtual service.
 Port—Port number of the virtual service.
• SNat—Source address translation information:
 IP-address—IP address after translation.
 Port—Port number after translation.
• Real Service—Real service information:
 IP-address—IP address of the real service.
 Port—Port number of the real service.
 rservicename—Real service name.
• Client—Client information:
 IP-address—IP address of the client.

Port—Port number of the client.
L4 LB session restored. VPN ID: VPN-ID, Virtual
Service (IP: IP-address, Port: Port), SNat (IP:
IP-address, Port: Port), Real Service (IP: IP-address,
Port: Port, Name: rservicename), Client (IP:
IP-address, Port: Port)
LB restoration information. L4 LB session was restored:
• VPN-ID—VPN ID.
• Virtual Service—Virtual service information:
 IP-address—IP address of the virtual service.
 Port—Port number of the virtual service.
• SNat—Source address translation information:
 IP-address—IP address after translation.
 Port—Port number after translation.
• Real Service—Real service information:
 IP-address—IP address of the real service.
 Port—Port number of the real service.
 rservicename—Real service name.
• Client—Client information:
 IP-address—IP address of the client.

Port—Port number of the client.
L7 LB session backed up. Redirect: Redirect-info, Seq
num adjust: Seqnum-adjust, MSS: MSS-info, Request
Sequence Info (Init: init-info, Adjust len: adjust-len,
Next Adjust len: nextadjust-len), Response Sequence
Info (Init: init-info, Adjust len: adjust-len, Next Adjust
len: nextadjust-len).
LB backup information. L7 LB session backup
succeeded:
• Redirect-info—Redirection identifier.
• Seqnum-adjust—Sequence number adjustment
identifier.
• MSS-info—MSS information.
• Request Sequence Info—Requested sequence
number information:
 init-info—Initial information.
 adjust-len—Adjusted length.
 nextadjust-len—Next adjusted length.
• Response Sequence Info—Replied sequence
number information.
439