HP Comware 5 Debug Manual Vol 3

Terminal access debugging commands
The output description tables in this document only contain fields and messages that require an
explanation.
debugging rta error
Use debugging rta error to enable terminal access error debugging.
Use undo debugging rta error to disable terminal access error debugging.
Syntax
debugging rta error
undo debugging rta error
Default
Terminal access error debugging is disabled.
Views
User view
Default command level
1: Monitor level
Usage guidelines
Table 1 describes output fields and messages for the debugging rta error command.
Table 227 Output from the debugging rta error command
Field
Description
Telnet Do APP Message: Terminal[n] APP[m] receive
AsyncMsgEvtType[u], set APP kept
An error occurred when a Telnet virtual terminal
processed an ARP message. The ARP m of terminal n
receives asynchronous messages u, and the ARP state
is set to kept.
The ARP state can be one of the following:
• Kept—No connection is established.
• Linking—A connection is being established.
• Linked—A connection has been established.
SSH Do APP Message: Terminal[n] APP[m] receive
RTA_SSHMsgEvtType[u], set APP kept
An error occurred when an SSH virtual terminal
processed an ARP message. The ARP m of terminal n
receives asynchronous messages u, and the ARP state
is set to kept.
The ARP state can be one of the following:
• Kept—No connection is established.
• Linking—A connection is being established.
•
Linked—A connection has been established.
442