HP Comware 5 Debug Manual Vol 3

Table 231 Output from the debugging ipv4-tunnel error command (on multi-core devices)
Field
Description
Tunnel interface is down. Dropped the packet The packet was discarded because the tunnel is down.
Table 3 describes the output fields and messages for the debugging ipv4-tunnel packet command (on
single-core devices).
Table 232 Output from the debugging ipv4-tunnel packet command (on single-core devices)
Field
Description
Tunnelm packet:Before encapsulation,
Outer packet header
ipaddress1->ipaddress2(length = length)
The source address and destination address of the
packet to be encapsulated on interface Tunnelm are
ipaddress1 and ipaddress2, respectively. The length
of the packet is length.
Tunnelm packet:After encapsulation,
Outer packet header ipaddress1->
ipaddress2(length = length)
The source address and destination address of the
packet after encapsulation on interface Tunnelm are
ipaddress1 and ipaddress2, respectively. The length
of the packet is length.
Ipv4-tunnel_packet: Decapsulate tunnel packet
Incoming packet header ipaddress1->
ipaddress2(length = length)
The source address and destination address of the
packet to be decapsulated are ipaddress1 and
ipaddress2, respectively. The length of the packet is
length.
Tunnelm packet:After decapsulation,
Outgoing packet header ipaddress1->
ipaddress2(length = length)
The source address and destination address of the
packet after decapsulation on interface Tunnelm are
ipaddress1 and ipaddress2, respectively. The length
of the packet is length.
Table 4 describes the output fields and messages for the debugging ipv4-tunnel packet command (on
multi-core devices).
Table 233 Output from the debugging ipv4-tunnel packet command (on multi-core devices)
Field
Description
Tunnelnum packet: Before encapsulation, packet
header source-address->destination-address(length =
length)
The source address and destination address of the
packet to be encapsulated on interface Tunnelnum are
source-address and destination-address, respectively.
The length of the packet is length.
Tunnelnum packet: After encapsulation, outgoing
packet header
source-address->destination-address(length = length)
The source address and destination address of the
packet after encapsulation on interface Tunnelnum are
source-address and destination-address, respectively.
The length of the packet is length.
packet: Before decapsulation, packet header
source-address->destination-address(length = length)
The source address and destination address of the
packet to be decapsulated are source-address and
destination-address, respectively. The length of the
packet is length.
Tunnelnum packet: After decapsulation, outgoing
packet header
source-address->destination-address(length = length)
The source address and destination address of the
packet after decapsulation on interface Tunnelnum
are source-address and destination-address,
respectively. The length of the packet is length.
451