HP Comware 5 Debug Manual Vol 3

dialer number 106
#
user-interface tty 177
modem both
#
# Enable modem debugging on Router A, and then ping Router B from Router A.
<Sysname> debugging modem interface Analogmodem 5/1
<Sysname> ping -c 1 51.0.0.2
*Mar 31 12:13:00:352 2006 Sysname MODEM/7/debug_CTRL:
Analogmodem5/1 Modem received information: MDM_DDR_CONN_REQ
// Analogmodem 5/1 received a connection request.
*Mar 31 12:13:00:352 2006 Sysname MODEM/7/debug_AT_Send:
Analogmodem5/1 Data of AT is sent: ATDT105
// Analogmodem 5/1 sent the number to be called.
*Mar 31 12:13:00:352 2006 Sysname MODEM/7/debug_ModemState:
Analogmodem5/1 The modem state is changed: from IDLE to CONNECT
// Analogmodem 5/1 turned from idle state to connected state.
*Mar 31 12:13:00:379 2006 Sysname MODEM/7/debug_AT_Recv:
Analogmodem5/1 Data of AT is received: ATDT105
// Analogmodem 5/1 received an AT command: ATDT105.
*Mar 31 12:13:22:875 2006 Sysname MODEM/7/debug_AT_Recv:
Analogmodem5/1 Data of AT is received: CONNECT 57600
// Analogmodem 5/1 received an AT command: connect 57600.
*Mar 31 12:13:25:780 2006 Sysname MODEM/7/debug_CTRL:
Analogmodem5/1 Modem received information: MDM_PHY_CD_UP
// Analogmodem 5/1 received a message that the CD signal was valid.
*Mar 31 12:13:25:886 2006 Sysname MODEM/7/debug_ModemState:
Analogmodem5/1 The modem state is changed: from CONNECT to ACTIVE
// Analogmodem 5/1 changed from connected state to active state.
*Mar 31 12:13:33:630 2006 Sysname MODEM/7/debug_CTRL:
Analogmodem5/1 Modem received information: MDM_DDR_DISC_REQ
// Analogmodem 5/1 received a disconnect request. This message is displayed when the dialer
disconnect command is executed to disconnect the modem.
*Mar 31 12:13:33:738 2006 Sysname MODEM/7/debug_ModemState:
Analogmodem5/1 The modem state is changed: from ACTIVE to DISCONNECT
// Analogmodem 5/1 changed from active state to disconnect state.
*Mar 31 12:13:33:738 2006 Sysname MODEM/7/debug_AT_Send:
Analogmodem5/1 Data of AT is sent: +++
// Analogmodem 5/1 issued a command to terminate the connection.
*Mar 31 12:13:34:583 2006 Sysname MODEM/7/debug_AT_Recv:
Analogmodem5/1 Data of AT is received: NO CARRIER
// Analogmodem 5/1 received a no-carrier AT data command.
*Mar 31 12:13:35:750 2006 Sysname MODEM/7/debug_ModemState:
Analogmodem5/1 The modem state is changed: from DISCONNECT to IDLE
38