HP Comware 5 Debug Manual Vol 3

VLAN termination debugging commands
The VLAN termination module name is identified as "SIFVLAN" in debugging messages.
The output description tables in this document only contain fields and messages that require an
explanation.
debugging vlan
Use debugging vlan to enable VLAN termination debugging.
Use undo debugging vlan to disable VLAN termination debugging.
Syntax
debugging vlan { all | error | event | packet } [ interface interface-type interface-number ]
undo debugging vlan { all | error | event | packet } [ interface interface-type interface-number ]
Default
All types of VLAN termination debugging are disabled.
Views
User view
Default command level
1. Monitor level
Parameters
all: All debugging functions for VLAN termination.
error: Debugging for errors occurred in VLAN termination.
event: Event debugging for VLAN termination.
packet: Packet debugging for VLAN termination.
interface interface-type interface-number: Specifies an interface by its type and number.
Usage guidelines
Table 1 describes output fields and messages for the debugging vlan command.
463