HP Comware 5 Debug Manual Vol 3

VoFR debugging commands
The output description tables in this document only contain fields and messages that require an
explanation.
debugging voice vofr
Use debugging voice vofr to enable VoFR debugging.
Use undo debugging voice vofr to disable VoFR debugging.
Syntax
debugging voice vofr { all | error | event | fax packet { from-dp | from-net | to-dp | to-net } | fsm | info
| timer }
undo debugging voice vofr { all | error | event | fax packet { from-dp | from-net | to-dp | to-net } | fsm
| info | timer }
Default
VoFR debugging is disabled.
Views
User view
Default command level
2: System level
Parameters
all: Specifies all types of debugging for VoFR.
error: Specifies error debugging.
event: Specifies event debugging.
fax packet: Specifies fax packet debugging.
from-dp: Fax packets from voice interfaces.
from-net: Fax packets from Frame Relay networks.
to-dp: Fax packets to voice interfaces.
to-net: Fax packets to Frame Relay networks.
fsm: Specifies finite state machine debugging.
info: Specifies information debugging.
timer: Specifies timer debugging.
Usage guidelines
Table 1 describes output fields and messages for the debugging voice vofr error command.
467