HP Comware 5 Debug Manual Vol 3

Field
Description
delete vofr address information in entity entity index
The VoFR address information in VoFR voice entity
entity index was deleted.
This operation was triggered by deletion of a serial
interface.
Receive Vim VIEVT_COM_FAXTONE_STOP_IND
Message!
The stop-sending-fax-tone event was received from the
VIM.
recvive vim fax tone VI_FAX_TONE_CNG!
The fax calling tone (CNG) was received from the
VIM.
receive vim fax tone VI_FAX_TONE_CED!
The fax answer tone (CED) was received from the
VIM.
receive vim fax tone VI_FAX_TONE_END! The fax-end tone (END) was received from the VIM.
fax switch to voice start!
The fax-to-voice switching event started to be
processed.
send last t4 packet to net! The last T4 data packet was sent to the network.
Table 3 describes output fields and messages for the debugging voice vofr fax packet from-dp
command.
Table 242 Output from the debugging voice vofr fax packet from-dp command
Field
Description
voice_vofr_fax packet from dp:
len = packet length, time = system time, status = fax
status
fax data from dp
The fax data received from the VIM was displayed.
The packet length, current system time, status of the
fax module, and fax data received from the bottom
layer were displayed sequentially.
Table 4 describes output fields and messages for the debugging voice vofr fax packet from-net
command.
Table 243 Output from the debugging voice vofr fax packet from-net command
Field
Description
voice_vofr_fax packet from net:
len = packet length, time = system time, status = fax
status
fax data from net
The fax data received from the network side was
displayed.
The packet length, current system time, status of the
fax module, and fax data received from the network
side were displayed sequentially.
Table 5 describes output fields and messages that require an explanation for the debugging voice vofr
fax packet to-dp command.
Table 244 Output from the debugging voice vofr fax packet to-dp command
Field
Description
voice_vofr_fax packet to dp
The fax data sent to the bottom layer was displayed.
This field is reserved for future use.
Table 6 describes output fields and messages for the debugging voice vofr fax packet to-net command.
471