HP Comware 5 Debug Manual Vol 3
Table 245 Output from the debugging voice vofr fax packet to-net command
Field
Description
voice_vofr_fax packet to net:
len = packet length, time = system time, status = fax
status
fax data to net
The fax data sent to the network side was displayed.
The packet length, current system time, status of the
FAX module, and fax data sent to the network side
were displayed sequentially.
Table 7 describes output fields and messages for the debugging voice vofr fsm command.
Table 246 Output from the debugging voice vofr fsm command
Field
Description
VOFR_STANDARD_SWITCH:
call status changed!
LocalCallID: Local Call ID,
CurrentStatus: Current call status
PastStatus: Past call status
In the Huawei-compatible mode, the call state
changed.
LocalCallID: ID of the call control block related to the
current call.
CurrentStatus: Current call status.
PastStatus: Previous call status.
S_IDLE The CCB was in the idle state.
S_M_SETUP
Status of the CCB after a VOFR_SETUP message was
sent for an outgoing call.
S_M_CALLPROC
Status of the CCB after a VOFR_CALLPROCEEDING
message was received for an outgoing call.
S_M_ALERTING
Status of the CCB after an ACCP_ALERTING
message was sent for an outgoing call.
S_M_CONNECT
Status of the CCB after a VOFR_CONNECT
message was received for an outgoing call.
S_B_SETUP
Status of the CCB after a VOFR_SETUP message was
received for an incoming call.
S_B_CALLOUT
Status of the CCB after an ACCP_SETUP message
was sent to the CMC for an incoming call.
S_B_SETUPACK
Status of the CCB after an ACCP_SETUP_ACK
message was received for an incoming call.
S_B_ALERTING
Status of the CCB after an ACCP_ALERTING
message was received for an incoming call.
S_B_CONNECT
Status of the CCB after an ACCP_CONNECT
message was received for an incoming call.
VOFR_MODE_VOICE->VOFR_MODE_SWITCH_RTFA
X
The state changed from voice to wait-to-switch-to-fax.
VOFR_MODE_SWITCH_RTFAX->
VOFR_MODE_VOICE
The state changed from wait-to-switch-to-fax to voice.
Table 8 describes output fields and messages for the debugging voice vofr info command.
472