HP Comware 5 Debug Manual Vol 3

Examples
# Enable debugging for VoFR errors on Ro u t e r 1. Output similar to the following example is generated
when Router 1 originates a call to Router 2 under the following conditions:
•
The Huawei-compatible protocol is configured as the call control protocol on Router 1.
•
The four codec types configured on Router 1 are different from those configured on Router 2.
<Router1> debugging voice vofr error
*Nov 17 14:19:40:612 2006 Router1 VOFR/7/VOFR:
voice_vofr_error:
VOFR_STANDARD_SWITCH: look up common codec type error!
// Router 1 and Router 2 do not have common codec types, and the call failed.
The output in the following examples was created under the following conditions:
•
The Huawei-compatible protocol is configured as the call control protocol on Router 1.
•
After Router 1 establishes a call with Router 2, Router 2 sends a switch-to-fax request to Router 1 and
Router 1 sends fax data to Router 2.
# Enable debugging for VoFR events on both Router 1 and Router 2.
<Router1> debugging voice vofr event
<Router2> debugging voice vofr event
•
Event debugging on Router 1:
*Sep 19 11:55:26:815 2006 Router1 VOFR/7/VOFR:
voice_vofr_event:
VOFR_STANDARD_SWITCH: ACCP_SETUP message received!
// Router 1 received an ACCP_SETUP message from the CMC.
*Sep 19 11:55:26:815 2006 Router1 VOFR/7/VOFR:
voice_vofr_event:
VOFR_STANDARD_SWITCH: send ACCP_SETUP_ACK successfully!
// An ACCP_SETUP_ACK message was sent to the CMC.
*Sep 19 11:55:26:816 2006 Router1 VOFR/7/VOFR:
voice_vofr_event:
VOFR_STANDARD_SWITCH: send VOFR_SETUP successfully!
// The VOFR_SETUP message was sent to Router 2.
*Sep 19 11:55:26:817 2006 Router1 VOFR/7/VOFR:
voice_vofr_event:
VOFR_STANDARD_SWITCH: VOFR_CALL_PROCEEDING received!
// A VOFR_CALL_PROCEEDING message was received from Router 2.
*Sep 19 11:55:27:213 2006 Router1 VOFR/7/VOFR:
voice_vofr_event:
VOFR_STANDARD_SWITCH: VOFR_ALERTING received!
// A VOFR_ALERTING message was received from Router 2.
*Sep 19 11:55:28:29 2006 Router1 VOFR/7/VOFR:
voice_vofr_event:
VOFR_STANDARD_SWITCH: send ACCP_ALERTING successfully!
// An ACCP_ALERTING message was sent to the CMC.
*Sep 19 11:55:28:231 2006 Router1 VOFR/7/VOFR:
voice_vofr_event:
VOFR_STANDARD_SWITCH: send ACCP_CHANNEL_READY successfully!
476