HP Comware 5 Debug Manual Vol 3

voice_vofr_info:
limit rate unchanged!
// The current fax rate was allowed, so it was unnecessary to change the fax rate.
*Sep 19 15:09:56:265 2006 Router1 VOFR/7/VOFR:
voice_vofr_info:
send last Modulation-Off to net
// A modulation-off signal was sent to the network side.
*Sep 19 15:11:20:554 2006 Router1 VOFR/7/VOFR:
voice_vofr_info:
send VICTL_COM_RTFAX_OFF to dsp!
// A signal to the DSP was sent to stop a fax instance.
*Sep 19 15:11:20:554 2006 Router1 VOFR/7/VOFR:
voice_vofr_info:
delete fax instance!
// A fax instance was deleted.
*Sep 19 15:11:20:555 2006 Router1 VOFR/7/VOFR:
voice_vofr_info:
send VICTL_COM_CODEC_UPDATE to dsp!
// A command was sent to the DSP to switch the codec type.
*Sep 19 15:11:20:555 2006 Router1 VOFR/7/VOFR:
voice_vofr_info:
send VICTL_COM_EC_ON to dsp!
// A command was sent to the DSP to enable EC.
*Sep 19 15:11:20:555 2006 Router1 VOFR/7/VOFR:
voice_vofr_info:
send VICTL_COM_VAD_OFF to dsp!
// A command was sent to the DSP to disable VAD.
*Sep 19 11:55:47:859 2006 Router1 VOFR/7/VOFR:
voice_vofr_info:
attach vofrid
interface = subscriber-line5/0
vofrid = 255
// The VoFR ID was deregistered with the VIM. The VoFR ID in the VIM was set to the invalid value
255 .
•
Debugging for VoFR information on Router 2:
*Sep 19 11:52:08:932 2006 Router2 VOFR/7/VOFR:
voice_vofr_info:
callee number = 100
// The called number was 100.
*Sep 19 11:52:08:933 2006 Router2 VOFR/7/VOFR:
voice_vofr_info:
caller number = 200
// The calling number is 200.
*Sep 19 11:52:08:933 2006 Router2 VOFR/7/VOFR:
voice_vofr_info:
codec = 67, 8, 9, 201
483