HP Comware 5 Debug Manual Vol 3

Voice subscriber line debugging commands
The output description tables in this document only contain fields and messages that require an
explanation.
debugging voice cmc
Use debugging voice cmc to enable Call Management Center (CMC) debugging.
Use undo debugging voice cmc to disable CMC debugging.
Syntax
debugging voice cmc { all | error | event | fsm | info | timer }
undo debugging voice cmc { all | error | event | fsm | info | timer }
Default
CMC debugging is disabled.
Views
User view
Default command level
2: System level
Parameters
all: All types of CMC debugging.
error: CMC error debugging.
event: CMC event debugging.
fsm: CMC FSM debugging.
info: CMC information debugging.
timer: CMC timer debugging.
Examples
The output in the following examples was created when the caller 100 calls the callee 400:
# Enable CMC event debugging on the originating device.
<Sysname> debugging voice cmc event
Enable CMC EVENT message debugging functions
*Nov 26 09:48:36:343 2006 Sysname CMC/7/VOICE:
LGS -->CMC : ACCP_SETUP CallID = 0xffffffff LocalID = 0xf
CalledAddr......400
CallerAddr......100
Source IfIndex..0x2c0030
CallInfoTab.....0x0
Q931Info........Invalid
// LGS sent an ACCP_SETUP message to CMC.
488