HP Comware 5 Debug Manual Vol 3

Table 31 Output from the debugging mpls l2vpn connection command
Field
Description
RmtCEID Remote CE identifier.
vcid VC identifier.
vctype VC type.
dest Destination LSR address.
Table 5 describes output fields and messages for the debugging mpls l2vpn error command.
Table 32 Output from the debugging mpls l2vpn error command
Field
Description
Invalid Remote interface - not able to get the outifindex
Invalid remote interface. Not able to get the outgoing
interface index.
Examples
# Enable debugging for MPLS L2VPN advertisement. Output similar to the following example is
generated when these tasks are performed:
•
Connect three routers that are directly connected.
•
Configure MPLS, MPLS LDP, and Martini settings on each router, and establish a Martini connection
between two routers.
•
Execute the debugging mpls l2vpn advertisement command on one PE router.
•
Shut down the Martini-enabled interface that is connected to the private network.
<PE1> debuggiing mpls l2vpn advertisement
<PE1> terminal monitor
<PE1> terminal debugging
<PE1> system-view
[PE1] interface vlan-interface 80
[PE1-Vlan-interface80] display this
#
interface Vlan-interface80
ip address 100.5.1.2 255.255.255.0
mpls l2vc 33.33.33.33 100
#
return
[PE1-Vlan-interface80]
[PE1-Vlan-interface80]
[PE1-Vlan-interface80] shutdown
[PE1-Vlan-interface80]
%Jul 6 17:56:30:172 2006 PE1 IFNET/5/LINK UPDOWN:
Vlan-interface80: link status is DOWN
*0.3799203 PE1 L2V/8/DBG:
! [L2VPN-LDP]Info :
sent label withdraw message.
context of message as follow:
-----------------------------
43