HP Comware 5 Debug Manual Vol 3

VRRP debugging commands
The output description tables in this document only contain fields and messages that require an
explanation.
The term "router" in this chapter refers to both routers and Layer 3 switches.
IPv4 VRRP debugging commands
debugging vrrp error
Use debugging vrrp error to enable IPv4 VRRP error debugging.
Use undo debugging vrrp error to disable IPv4 VRRP error debugging.
Syntax
debugging vrrp error
undo debugging vrrp error
Default
IPv4 VRRP error debugging is disabled.
Views
User view
Default command level
1. Monitor level
Examples
# Enable IPv4 VRRP error debugging. (VRRP operates in standard mode.)
<Sysname> terminal debugging
<Sysname> terminal monitor
<Sysname> debugging vrrp error
*Apr 27 21:55:24:781 2000 Sysname VRRP/7/DebugError:
The VRRP packet is illegal
// An illegal VRRP packet was received.
# Enable IPv4 VRRP error debugging. (VRRP operates in load balancing mode.)
<Sysname> terminal debugging
<Sysname> terminal monitor
<Sysname> debugging vrrp error
*Apr 27 21:57:23:763 2000 Sysname VRRP/7/DebugError:
The VRRP packet is illegal
// An illegal VRRP packet was received.
515