HP Comware 5 Debug Manual Vol 3

Default
IPv4 VRRP state debugging is disabled.
Views
User view
Default command level
1. Monitor level
Usage guidelines
Table 3 describes output fields and messages for the debugging vrrp state command.
Table 251 Output from the debugging vrrp state command
Field
Description
IPv4 interface-name | Virtual Router vrid : state1
--> state2
IPv4 VRRP group vrid on interface interface-name
transitioned from state1 to state2.
VRRP group states:
• Created.
• Inactive.
• Initialize.
• Backup.
• Master.
• Deleted.
IPv4 interface-name | Virtual Router vrid : state1
--> state2 reason: reason
IPv4 VRRP group vrid on interface interface-name
transitioned from state1 to state2 due to reason.
VRRP group states:
• Created.
• Inactive.
• Initialize.
• Backup.
• Master.
• Deleted.
State transition reasons:
• Timer expired.
• VRRP packet received.
• Adding virtual MAC address failed.
• Interface event received.
• IP address deleted.
• Insufficient hardware resources.
• Illegal IP addresses added.
• The status of the tracked object changed.
521