HP Comware 5 Debug Manual Vol 3

Examples
# Enable IPv6 VRRP error debugging. (VRRP operates in standard mode.)
<Sysname> terminal debugging
<Sysname> terminal monitor
<Sysname> debugging vrrp ipv6 error
*Apr 27 21:56:57:300 2000 Sysname VRRP/7/DebugError:
The VRRP Packet is illegal
// An illegal VRRP packet was received.
# Enable IPv6 VRRP error debugging. (VRRP operates in load balancing mode.)
<Sysname> terminal debugging
<Sysname> terminal monitor
<Sysname> debugging vrrp ipv6 error
# Specify the load balancing mode for IPv6 VRRP.
<Sysname> system-view
[Sysname] vrrp mode load-balance
*Apr 27 21:56:57:300 2000 Sysname VRRP/7/DebugError:
The VRRP Packet is Illegal
// An illegal VRRP packet was received.
debugging vrrp ipv6 event
Use debugging vrrp ipv6 event to enable IPv6 VRRP event debugging.
Use undo debugging vrrp ipv6 event to disable IPv6 VRRP event debugging.
Syntax
debugging vrrp ipv6 event
undo debugging vrrp ipv6 event
Default
IPv6 VRRP event debugging is disabled.
Views
User view
Default command level
1. Monitor level
Usage guidelines
Table 4 describes output fields and messages for the debugging vrrp ipv6 event command.
Table 252 Output from the debugging vrrp ipv6 event command
Field
Description
Status of VRRP IPv6 track object
track-entry-number changed to state
Track object state:
• positive.
• negative.
• invalid.
524