HP Comware 5 Debug Manual Vol 3

*Oct 15 13:35:38:344 2008 Sysname VRRP/7/DebugPacket:
Sent Request message from Ethernet1/1
VRID: 1 MAC: 0000-5e01-1101 IP: FE80::1
// A request with MAC address 0000-5e01-1101 and IP address F E 8 0 : :1 was sent from Ethernet 1/1.
*Oct 15 13:35:40:719 2008 Sysname VRRP/7/DebugPacket:
Sent Advertisement message from Ethernet1/1
VRID: 1 Pri: 100 Adver timer: 100 centisecs
// Ethernet 1/1 sent an advertisement with VRID 1, router priority 100, and a sending interval of 1
second.
*Oct 15 13:35:40:719 2008 Sysname VRRP/7/DebugPacket:
Sent Advertisement message from Ethernet1/1
VRID: 1 Pri: 100 Adver timer: 100 centisecs
Weight: 255
Forwarder 1:
Pri: 255 Timer: 600/1800 secs Owner ID: 0000-5e01-1101
// Ethernet 1/1 sent an advertisement.
debugging vrrp ipv6 state
Use debugging vrrp ipv6 state to enable IPv6 VRRP state debugging.
Use undo debugging vrrp ipv6 state to disable IPv6 VRRP state debugging.
Syntax
debugging vrrp ipv6 state
undo debugging vrrp ipv6 state
Default
IPv6 VRRP state debugging is disabled.
Views
User view
Default command level
1. Monitor level
Usage guidelines
Table 6 describes output fields and messages for the debugging vrrp ipv6 state command.
529