HP Comware 5 Debug Manual Vol 3

WEB filtering debugging commands
debugging firewall http url-filter host
Use debugging firewall http url-filter host to enable debugging for URL address filtering.
Use undo debugging firewall http url-filter host to disable debugging for URL address filtering.
Syntax
debugging firewall http url-filter host { event | packet }
undo debugging firewall http url-filter host { event | packet }
Default
Debugging for URL address filtering is disabled.
Views
User view
Default command level
2: System level
Parameters
event: Specifies event debugging.
packet: Specifies packet debugging.
Examples
# Enable packet debugging for URL address filtering. Output similar to the following example is
generated when a client on the private network accesses www.webfilter.com under the following
conditions:
•
The URL address filtering function is configured on the device.
•
A filtering rule denies Web requests to www.webfilter.com.
<Sysname> debugging firewall http url-filter host packet
*Feb 24 10:33:58:500 2007 Sysname DPALG/7/debug:
URL host filter dropped the packet.
// A request packet was dropped by the URL address filter.
debugging firewall http url-filter parameter
Use debugging firewall http url-filter parameter to enable debugging for URL parameter filtering.
Use undo debugging firewall http url-filter parameter to disable debugging for URL parameter filtering.
Syntax
debugging firewall http url-filter parameter { event | packet }
undo debugging firewall http url-filter parameter { event | packet }
533