HP Comware 5 Debug Manual Vol 3

MPLS L3VPN debugging commands
The output description tables in this document only contain fields and messages that require an
explanation.
debugging l3vpn
Use debugging l3vpn to enable debugging for L3VPN.
Use undo debugging l3vpn to disable debugging for L3VPN.
Syntax
debugging l3vpn { all | hsb | cfgmsg }
undo debugging l3vpn { all | hsb | cfgmsg }
Default
The debugging for L3VPN is disabled.
Views
User view
Default command level
1: Monitor level
Parameters
all: Specifies all types of debugging for L3VPN.
hsb: Specifies debugging for L3VPN hot standby.
cfgmsg: Specifies debugging for L3VPN configuration message processing.
Usage guidelines
Table 1 describes the output fields and messages for the debugging l3vpn command.
Table 33 Output from the debugging l3vpn command
Field
Description
L3VPN VRFMGM VrfCreate....entered L3VPN began to create VPN instances.
L3VPN VRFMGM VrfCreate....leaving L3VPN finished creating VPN instances.
L3VPN VRFMGM RdAssign....entered L3VPN began to assign a route distinguisher.
L3VPN VRFMGM RdAssign....leaving L3VPN finished assigning a route distinguisher.
L3VPN VRFMGM RtList Assign....entered L3VPN began to assign VPN targets.
L3VPN VRFMGM RtList Assign....leaving L3VPN finished assigning VPN targets.
L3VPN VRFMGM CreateDesc....entered
L3VPN began to create a description for the current
VPN instance.
L3VPN VRFMGM CreateDesc....leaving
L3VPN created a description for the current VPN
instance.
50