HP Comware 5 Debug Manual Vol 3

Field
Description
L3VPN CORE Get Batch BackUp Data....entered L3VPN began to get batch backup data.
L3VPN CORE Get Batch BackUp Data....leaving L3VPN finished getting batch backup data.
PackOneBatchVrf....entered L3VPN began to get a batch of VRFs.
PackOneBatchVrf....leaving
L3VPN finished getting a batch of VRFs.
PackOneVrf....entered
L3VPN began to get one VRF.
PackOneVrf....leaving
L3VPN finished getting one VRF.
Vrf: VrfId bind Interface: IfIndex success
L3VPN bound a VRF with an interface successfully.
Vrf: VrfId unbind Interface: IfIndex success
L3VPN unbound a VRF from an interface successfully.
Vrf: VrfId bind Interface: IfIndex failure
L3VPN failed to bind a VRF with an interface.
Vrf: VrfId unbind Interface: IfIndex failure
L3VPN failed to unbind a VRF from an interface.
Receive (chassis chassisID, slot slotID) Plug In Notify
L3VPN received the card (in chassis chassisID, slot
slotID) plug-in notify message.
Examples
# Enable all types of debugging for L3VPN. Output similar to the following example is generated when
these tasks are performed in order:
•
Create a VPN instance.
•
Configure an RD and VPN target.
•
Configure a description for the VPN instance and delete it.
•
Configure an import route policy.
•
Configure a VPN route number limit.
•
Bind the VPN instance to an interface.
<Sysname> debugging l3vpn all
[Sysname] ip vpn-instance vpna
*0.1362469 Sysname L3VPN/8/L3VPNDBG:
L3VPN VRFMGM VrfCreate....entered
// L3VPN began to create a VPN instance.
*0.1362469 Sysname L3VPN/8/L3VPNDBG:
L3VPN VRFMGM VrfCreate....leaving
// L3VPN finished creating the VPN instance.
[Sysname-vpn-instance-vpna] route-distinguisher 100:1
*0.1538078 Sysname L3VPN/8/L3VPNDBG:
L3VPN VRFMGM RdAssign....entered
// L3VPN began to assign an RD.
*0.1538078 Sysname L3VPN/8/L3VPNDBG:
L3VPN VRFMGM RdAssign....leaving
// L3VPN finished assigning the RD.
[Sysname-vpn-instance-vpna] vpn-target 111:1
IVT Assignment result:
VPN-Target assignment is successful
EVT Assignment result:
52